Sony 4-129-925-11(1) - Manual (Page 16)

16 GB
• Set “CTRL: HDMI” to “OFF” in the AMP menu of
the stand when connecting components without
HDMI jacks (page 32).
Even if “CTRL: HDMI” is set to “ON,” you can enjoy
a video cassette recorder, etc., that does not have
surround channels by connecting its audio and video
output jacks directly to the TV instead of the stand.
• The INPUT OPT jack has priority when you connect
both the audio output of the TV to the INPUT OPT
and INPUT ANALOG jack of the stand.
Depending on the audio output settings of the
connected component, the sound may output in 2
channel sound format only. In this case, set the
connected component to output the sound in
multi channel sound format (PCM, DTS, Dolby
Digital). For details on audio output settings,
refer to the operating instructions supplied with
the connected component.
Notes
Setting up the sound
output of the connected
component