Sony 4-129-925-11(1) - Manual (Page 10)

10 GB
Installing the shelf board
1
Insert the attaching shelf support pins
(supplied) into the holes in the stand.
2
Fit the shelf board onto the shelf
support pins horizontally.
Connecting the AM loop
antenna (aerial)
The shape and the length of the antenna (aerial)
are designed to receive AM signals. Do not
dismantle or roll up the antenna (aerial).
1
Remove only the loop part from the
plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna
(aerial) terminals.
The cords can be connected to either
terminal.
• Do not place the AM loop antenna (aerial) near the
system or other AV component, as noise may result.
• Adjust the direction of the AM loop antenna (aerial)
for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial)
is connected firmly by pulling softly.
Note
Tip
TV OUT DVD IN
DMPORT
HDMI
SAT/CATV
IN
DC 5V
0.7A MAX
BD IN
ANTENNA
AM 75 COAXIAL
FM
Insert until this
part.
Insert the cords by pushing down the terminal
clamp.