Basic recording, Grabación básica, Español english – Samsung AD68-00839J User Manual
Page 40: Making your first recording, Primera grabación

ESPAÑOL
ENGLISH
Basic Recording
39
39
Making your First Recording
1. Connect a power source to the
Camcorder. (see page 20)
(A Battery pack or a AC Power adapter)
Insert a cassette.(see page 36)
2. Remove the Lens cover.
3. Set the Power switch to CAMERA.
■
Open the LCD screen.
■
Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only)
Make sure that STBY is displayed.
■
If the write protection tab of the
cassette is open(set to save), STOP
and Protection! will be displayed.
Release the write protection tab to record.
■
Make sure the image you want to record appears on the LCD screen or
Viewfinder.
■
Make sure the battery level indicates that there is enough remaining power
for your expected recording time.
4. To start recording, press the Start/Stop button.
■
REC
● is displayed on the LCD screen.
To stop recording, press the Start/Stop button again.
■
STBY is displayed on the LCD screen.
[ Note ]
Detach the Battery pack when you are finished recording to prevent
unnecessary battery power consumption.
Grabación básica
Primera grabación
1. Conecte a la cámara a una fuente de
alimentación. (Consulte la página 20.)
(Una batería o un adaptador de CA.)
Introduzca un casete. (Consulte la
página 36.)
2. Retire la tapa del objetivo.
3. Coloque el interruptor Power en
CAMERA.
■
Abra la pantalla LCD.
■
Coloque el interruptor Mode en
TAPE. (Sólo VP-D353(i)/D354(i)/
D355(i)) Asegúrese de que aparece
STBY.
■
Si la pestaña de protección del casete está abierta (protegida), aparecerá
STOP and Protection!
■
Asegúrese de que la imagen que desea grabar aparezca en la pantalla
LCD o en el visor.
■
Asegúrese de que el nivel de la batería indique que tiene suficiente energía
para grabar durante el tiempo deseado.
4. Pulse el botón Start/Stop para empezar a grabar.
■
Aparece REC
● en la pantalla LCD.
Para detener la grabación, pulse de nuevo el botón Start/Stop.
■
Aparece STBY en la pantalla LCD.
[ Nota ]
Retire la batería al terminar de grabar para evitar un consumo innecesario de la
misma.
4
1
3
2
√
√