Program. (programming) menu – Sharp 28LF-92H User Manual

Page 16

- 15 -

To store the station to the programme number selected, se-

lect STORE option using or button and then press
or button or press OK button.

Now as you had selected the Frequency Search, the tuning

mode of the program is stored as Frequency Search Mode.

Note : Channel Search Tuning Mode uses a channel table.

The channels and stations at the table may vary from table to

table and from country to country. Each channel has an ex-

act frequency on the table.
Frequency Search Tuning Mode does not use a channel

table and it is slower than Channel Search Tuning Mode.

Channel Search Tuning Mode is recommended for the

countries which uses standard channel table.

Frequency Search Tuning Mode recommended for the

countries which uses non-standard channel table.

Program. (Programming) Menu

You can use the Program. (Programming) menu to delete a

channel, to change the programme number of a channel, to

give a channel name to a channel, and to start the A.P.S

(AUTOSTORE) function.
Press M button to display the main menu.
Press or button to select PROGRAM. item, then

or button to display the PROGRAM. menu.

(

ГГГГГ

! ГГГГГ

!!ГГГГГ

!"ГГГГГ

!#ГГГГГ

!$ГГГГГ

!%ГГГГГ

!&ГГГГГ

!'ГГГГГ

!(ГГГГГ

"ГГГГГ

6VUPTUPS@

DIT@SU

9@G@U@

I6H@

ГГ8Г !

!ГГ8Г!"

"ГГ8Г#$

#ГГ8Г#&

$ГГ8Г$

%ГГ8Г$$

&ГГГГГ

'ГГ

(ГГ

ГГ

ГГГ

To choose a channel in the PROGRAM. menu:

Press / / / button. The programme number

that you choose is high-lighted in the PROGRAM. menu

and you can view the picture of that channel.

Caution:
Using the DELETE or INSERT function it is possible to re-

write the current channel list in the PROGRAM menu. This

can cause other channels to be changed if they were former-

ly in locations affected by this function.

To give a channel name (NAME):

1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press or button to choose the position, and press

or button to choose each character of channel

name.

4. Press the RED button to store the channel name.

To cancel the NAME mode, press the BLUE button.

To delete a channel (DELETE):

1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.

To cancel this DELETE mode, press the BLUE button.

To change the programme number of a channel

(INSERT):

1. Choose the channel you want to change the programme

number.

2. Press the GREEN button to enter the INSERT mode.
3. Press / / / button to choose new

programme number.

4. Press the GREEN button to insert the channel to the cho-

sen programme number.

To cancel this INSERT mode, press the BLUE button.

To start A.P.S (AUTOSTORE)

A.P.S. automatically programmes the received channels in

your TVs programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.

A warning message appears.

6GGÃ QS@TUPS@9Ã QSPBS6HH@T

XDGGÃ 7@Ã @S6T@9

8PVIUS`

UVIDIBÃHP9@

8PIUDIV@

UWГ)ГГГГГГГГГ86I8@G

8C6II@G

To cancel the AUTOSTORE mode, press the

but-

ton.

2. Press or button to choose the COUNTRY, then

press or button the choose country you are now lo-

cated.

3. By pressing the up and down buttons, come to the Tuning

Mode item and select the mode at which your TV will run

the APS.

4. Press or button to choose the CONTINUE, then

press button to start A.P.S. The following message ap-

pears.

6QTÃ DTÃ SVIIDIB

QG@6T@Ã X6DU

UWГ )ГГГГГГГГГГ 86I8@G

To cancel the A.P.S., press the

button.

5. After A.P.S. is finalized, the PROGRAM. menu appears

again.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28