SMC Networks EliteConnect SMCWHSG14-G - Manual (Page 63)

SMCWHSG14-G
62
Item Default Description
RADIUS Authentication Disable Option: No Authentication or RADIUS Server.
Disable (No Authentication) ―
Subscriber can direct access the Internet without enter
username and password.
Enable (RADIUS Authentication) ―
Wireless Hotspot Gateway provides “RADIUS Authentication”
for service provider to build up an Internet service with
RADIUS server. If RADIUS Authentication is enabled, all
subscribers’ authentication will send to RADIUS Server by
RADIUS protocol (RFC 2865, 2866).
Time to Finish/
Accumulation
Enable Service provider provides two different accounting calculate
for the Internet service.
Primary RADIUS Server
Server IP Empty Enter the IP address of RADIUS server.
Authentication Port 1812 Enter the authentication port number; the authentication port
number must match with the RADIUS server setting. The
allowed numbers are from 0 to 65535.
Accounting Port 1813 Enter the accounting port number; the accounting port number
must match with the RADIUS server setting. The allowed
numbers are from 0 to 65535.
Share Secret Key Empty The share secret key, the key number also has to match with
the Server setting. Up to 64 characters are allowed.
Secondary RADIUS Server
Server IP Empty Enter the IP address of RADIUS server.
Authentication Port 1812 Enter the authentication port number; the authentication port
number must match with the secondary RADIUS server
setting. The allowed numbers are from 0 to 65535.
Accounting Port 1813 Enter the accounting port number; the accounting port number
must match with the secondary RADIUS server setting. The
allowed numbers are from 0 to 65535.
Share Secret Key Empty The share secret key, the key number also has to match with
the secondary RADIUS Server setting. Up to 64 characters are
allowed.
Retry times when
Primary fail
1 Specify the retry times when primary fail.