Star Micronics SP200F - Manual (Page 23)

– 20 –
ENGLISH
6-4. Control Codes Used for Peripheral Units
Control codes Hexadecimal codes Function
n1 n2 1B 07 n1 n2 Adjust drive pulse width for peripheral unit (Default
setting)
07 Deferred drive command “A” for peripheral unit 1
1C Immediate drive command “B” for peripheral unit 1
6-5. Auto Cutter Control (SP240 type only)
Control codes Hexadecimal codes Function
“d” “0” 1B 64 30 Full-cut command to the auto cutter
“d” <0> 1B 64 00
“d” “1” 1B 64 31 Partial-cut command to the auto cutter
“d” <1> 1B 64 01
6-6. Other Control Codes
Control codes Hexadecimal codes Function
18 Cancel print data in buffer
“@” 1B 40 Initialize printer
“e” “0” 1B 65 30 ON LINE/FEED switch valid
“e” <0> 1B 65 00 (Default setting)
“e” “1” 1B 65 31 ON LINE/FEED switch invalid
“e” <1> 1B 65 01
“f” “0” 1B 66 30 ON LINE switch valid
“f” <0> 1B 66 00 (Default setting)
“f” “1” 1B 66 31 ON LINE switch invalid
“f” <1> 1B 66 01