Features – Verizon Network Extender User Manual

Page 14

Using Your Device

WAN Port allows you to connect the Ethernet cable

provided to establish communication between the Network

Extender and your broadband router. This connection port

is then used to transmit voice and data through the

Internet to the Verizon Wireless network, which then

authenticates the Network Extender and allows

communication with wireless phones.

• If the WAN LED does not illuminate, this indicates that the Ethernet

cable connection has not been detected.

Features

The following list highlights some of the Network Extender's
features:

•

The Network Extender is a Plug & Play device that can be installed to

automatically provide enhanced wireless telephone service in a home
or small office without having to change your existing mobile phone.

•

The Network Extender enables users to easily install and configure the

system by connecting to an existing broadband network.

•

This Network Extender supports voice and data calls. It allows as many

users as desired to register and supports up to six calls.

•

The Network Extender utilizes a GPS receiver to get both timing and

unit location information. In case of a weak GPS signal, install the
external GPS antenna and locate it near a window to receive a stronger
signal.

•

To prevent unauthorized users from accessing the Network Extender

and diminishing your available bandwidth, you have the option to
restrict the use of your Network Extender by logging into My Verizon at

www.verizonwireless.com

Note: Certain Verizon Wireless services are not compatible with the Network

Extender, refer to

for details.

Verizon - WSE.book Page 12 Thursday, December 9, 2010 11:07 AM