Verizon Network Extender - Manual (Page 13)

11
Components - Rear View
The rear of the Network Extender provides access to the WAN
port, power port, and external GPS antenna.
1. GPS Antenna Port slides to provide access to the external
GPS antenna for removal and relocation.
• A red GPS LED indicates a GPS signal could not be detected using
the internal GPS antenna. The external GPS antenna should be
connected. See “External GPS Antenna” on page 14.
2. Heat Vents provide passive ventilation for the Network
Extender and allow for dissipation of internally generated
heat.
Note: The Network Extender needs to remain vertical and in a well-ventilated
location. The vertical position allows proper air flow to the internal
components.
3. DC 12V Power Port provides power to the Network Extender
when connected to the AC power supply and cord
(included).
Warning!: Only use the provided power cord and supply. Using any other
power source may damage the Network Extender.
DC 12V Power Port
Heat
Vents
WAN
Port
GPS Antenna Port
Verizon - WSE.book Page 11 Thursday, December 9, 2010 11:07 AM