beautypg.com

Precautions, General information – Sharp XL-MP150 User Manual

Page 6

background image

6

XL-MP150

General Information

Precautions

„ General

z Please ensure that the equipment is positioned in a well-ventilated

area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.

z Do not place anything on top of the unit.
z Do not expose the unit to moisture, to temperatures higher than

140

˚

F (60

˚

C) or to extremely low temperatures.

z If your system does not work properly, disconnect the AC power

cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.

z This unit should only be used within the range of 41

˚

F - 95

˚

F (5

˚

C

- 35

˚

C).

Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.

„ Volume control

The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes.

z Use the unit on a firm, level surface free from

vibration.

z Keep the unit away from direct sunlight,

strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.

z In case of an electrical storm, unplug the

unit for safety.

MICRO COMPONENT SYSTEM

XL-MP150

CD

POWER/

4" (10 cm)

4" (10 cm)

4" (10 cm)

4" (10 cm)

/

MICR

O CO

MPON

ENT S

YSTE

M

XL-MP

150

POWE

R/

CD

z Hold the AC power plug by the head when

removing it from the AC outlet, as pulling
the cord can damage internal wires.

z Do not remove the outer cover, as this

may result in electric shock. Refer inter-
nal service to your local SHARP service
facility.