References – Sharp XL-MP150 User Manual

Page 39

XL-MP150

References

If trouble occurs

When this product is subjected to strong external interference (me-
chanical shock, excessive static electricity, abnormal supply voltage
due to lightning, etc.) or if it is operated incorrectly, it may malfunc-
tion.
If such a problem occurs, do the following:
1

Set the unit to the stand-by mode and turn the power on again.

If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.

Note:
If neither operation above restores the unit, clear all the memory by
resetting it.

Clearing all the memory (reset)

Press the ON/STAND-BY button to enter the power stand-by
mode.

While pressing down the

button and the X-BASS (SUR-

ROUND)/DEMO button, press the TUNING button until
"CLEAR ALL" appears.

Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.

Before transporting the unit

Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.

Care of compact discs

Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collec-
tion and player.
z Do not write on either side of the disc, particularly the non-label

side from which signals are read. Do not mark this surface.

z Keep your discs away from direct sunlight, heat, and excessive

moisture.

z Always hold the CDs by the edges. Fingerprints, dirt, or water on

the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.

X-BASS (SURROUND)

/DEMO

YES
Correct