Philips Saeco Modular LUXE CAP001/A - Manual (Page 5)

English
5
fig. 2
3 - SAFETY
fig. 3
L
P
h
3.1 General safety rules
• Carefully read this publication before utilising the machine.
• It is absolutely forbidden to deactivate the safety measures in-
stalled on the machine.
• Cleaning operation must be carried out with main switch (ref.
10, fig. 1) and all-pole switch in position “O“ or by discon-
necting the mains plug.
• Do not modify any part of the machine; by disregarding these
specifications the Manufacturer is released from all responsi-
bilities.
• Do not turn water sprays towards the machine.
3.2 Operators’ requisites
With safety in mind, two separate persons with different qualifica-
tions are distinguished:
Maintenance technician
Person responsible for the operations of installation, adjustment,
setting up and, in more general terms, for the machine’s mainte-
nance.
User
Person actually managing and operating the machine. The user is
permitted to start the machine, adjust the working parameters, load
the unit with coffee beans, empty the grounds and drip trays and
see to the outer cleaning of the machine.
2.5 Technical data
Dimensions (fig. 3) Luxe Coffee
L
. ...............................................................
mm 370
P
. ...............................................................
mm 525
h
. ..............................................................
mm 595
Weight
. .................................................................
kg 37
Rated power
. ......................................................
W 3250 1750
Mains voltage
. ..................................................
V 230V~/400V 2N~
Power cord length
. ..........................................
mm 1500
Water network allowable
pressure
. ................................................................
MPa 0,1 ч 0,8 (1 ч 8 bar)
Capacity
Coffee beans hopper
. ...................................
g 1100
Grounds tray
. ...................................................
no.~ 30
2.4 Machine identification
The machine is identified by the model name and serial number to
be found on the ID plate (fig. 2).
The plate carries the following specifications:
• Name of Manufacturer
• CE marking
• Machine model
• Serial number
• Year of manufacture
• Several manufacturing details:
- Mains voltage (V)
- Voltage frequency (Hz)
- Rated power (W)
- Number of mains phases (PH)
- Water network allowable pressure (MPa)
Important
For any request to AUTHORISED SERVICE CENTRES, always
refer to the ID plate, by reporting the specific machine data
recorded thereon.