Swim'n Play end deck - Manual (Page 9)

SMALL
ANGLE
SUPPORT
BAR
DECK
CLOSE UP #13
LARGE
ANGLE
SUPPORT
BAR
CLOSE UP #12
DECK
5
IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME
For the 15’ and 18’ Decks assemble the Center Patio to the already assembled deck sec-
tions using the 1” Round Head Screws and Hex Nuts.
For the 12’ Decks assemble the two outside deck sections together using the 1” Round
Head Screws and Hex Nuts.
Firmly tighten these screws.
Next, attach the Left Patio and Right Patio sections in the same manner, fi rmly tightening
the screws (let all other screws remain loose at this time).
For all size decks: At the two places labeled “Location A” in
the illustration above, attach Long Square Posts in the manner
illustrated at right in Close-up #15.
For the 18’ Decks only: At the two places labeled “Location B” in
the illustration above, also attach Long Square Posts in the manner
illustrated at right in Close-up #15.
9
DECK
SECTION
DECK
SECTION
LEFT PATIO RIGHT PATIO
LOCATION B
LOCATION A
POOL
CENTER
PATIO
(NOT USED
ON 12’ DECK)
CLOSE-UP #15
HEX
NUTS
2” SCREWS
1/4” x 20 x 2”
TRUSS HEAD SCREW
1/4” x 20
HEX NUT
1/4” x 20 x 1/2”
ROUND HEAD SCREW
FOR 18’ DECKS
ONLY