Swim'n Play end deck - Manual (Page 15)

Take the Verticals and attach two Fence Post Brackets to
each Vertical using the 1/4 x 20 x 3/4” Screws and Washers
and Hex Nuts provided as shown.
You may now assemble your pool.
FENCE POST
BRACKETS
(2 Pieces)
1/4" TRUSS
HEAD SCREW
VERTICAL
WASHER
HEX
NUT
10
15
Assemble the Square Fence Post to the Post Bracket using the
¼” x 20 x 2” Screws and Hex Nuts as shown at right. If your
pool is equipped with Full-Contoured Covers like those below,
you must first assemble the covers to the pool before attaching
the Posts. 11