Swim'n Play end deck - Manual (Page 14)

14
GENERAL ASSEMBLY ILLUSTRATION
Use the General Assembly Illustration below for reference as you assemble the Fensurround.
END POST
OR
CORNER POST
STANDARD POST
FENCE BRAKET
INSERTED
THROUGH POST
Before assembling your pool, drill the required holes
in the Verticals.
Simply place the bracket 7¾” from the top of the Vertical.
Then, using the Post Bracket as a template, drill through
the Vertical using a 5/16” drill bit.
If your pool is filled with water it will be necessary for you
to lower the water level to 2’ deep in order to safely drill
these holes and attach the Fence Post Brackets.
7¾”
9