SnapGear 1.7.8 - Manual (Page 8)

Installing and configuring your SnapGear appliance
This manual contains instructions for installing and configuring your SnapGear appliance
on your network. The basic steps and related chapters are:
Step Chapter
1. Interconnect the SnapGear appliance
and PCs on a local area network.
Chapter 2, Getting started
2. Connect the telecommunications
hardware/modem for dial-in/dial-out
Internet access. Chapter 3, Connecting to the Internet
3. Set up the network IP addresses and
firewall. Chapter 2, Getting started
4. Set up Internet hardware and Internet
account and connect to the Internet. Chapter 3, Connecting to the Internet
5. Set up users’ security dial-in/dial-out
VPN. Chapter 4, Dial-in server configuration
Chapter 6, Firewall
Chapter 7, Virtual Private Networking
Introduction
5