SnapGear 1.7.8 - Manual (Page 13)

Internet link features
• Connect to the Internet using an external cable modem, DSL, dial-up or ISDN
modem.
• Serial ports connect to the Internet using an external modem or ISDN T/A. The
LITE2, LITE2+, SME530 and SME550 models have a single serial port.
• 10baseT Ethernet port (Internet) that connect to the Internet using a cable or
ADSL modem.
• Front panel serial status LEDs (for TXD/RXD).
• Online status LEDs (for Internet/VPN).
• Rear panel Ethernet LEDs (Link Transmit/Receive).
LAN link features
• 10/100BaseT LAN port to connect to the local network Ethernet on PRO+, LITE2,
LITE2+, SME530 and SME550 models, 10BaseT on other models.
• Rear panel Ethernet LEDs (Link Transmit/Receive) on all models but LITE2 and
LITE2+.
Dial-in connection features
If you are using the SnapGear PRO+, PRO, SOHO+, SME530 or SME550, external
modems may be attached via serial port for dial-in connections. Additionally, the
SnapGear PRO+ has an internal modem that can be used for dial-in connections.
Introduction
10