SMC Networks SMC2004 - Manual (Page 6)

Driver Uninstallation
Follow the steps below to remove the the SMC EZ Connect USB
Network Bridge driver from Windows system:
1. Click the Start menu, point to Settings\Control Panel. Double
click Add/Remove Programs icon.
2. In Install/Uninstall tab, select SMC EZ Connect USB Network
Bridge Driver V1.5.0.0
3. Click Add/Remove button and then click OK.
4. Restart Windows system.
Troubleshooting
If you have successfully installed the driver, but can’t see either
your or the other computers’ names in Window’s Network
Neighborhood, please check the following points.
1. Make sure the EZ Connect USB
Cable is firmly connected to the
USB ports on your computer or
USB hubs.
2. Click the Start menu, point to
Settings`Control Panel. Double
click Network icon. In
Identification tab, ensure each
computer has been given a
unique name, not to conflict with
each other. Make sure the
Workgroup name is the same for
all the computers in the network
3. In Configuration tab, check the
“SMC EZ Connect USB Network
Bridge Adpater” is in The
following network components
are installed list.
4. In Configuration tab, click File
and Print Sharing button. Make
sure both I want to be able to
give others accesss to my files
and I want to be able to allow
others to print to my printer(s)
functions are selected. It would
cause the File and printer
sharing for microsoft networks
service be installed and enable
this computer to share its files and
printers to the others
After checking all these points, if the network is still not working
properly, please contact your supplier instead of revising the
settings by yourself unless you are an expert network user.
Disclaimer
Information in this document is subject to change without notice.
The manufacturer does not make any representations or warranties
(implied or otherwise) regarding the accuracy and completeness of
this document and shall in no event be liable for any loss of profit
or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any
form by any means, electronic or mechanical, including
photocopying, recording or information recording and retrieval
systems without the express written permission of the manufacturer.
All brand names and product names used in this document are
trademarks, or registered trademarks of their respective holders.
English
English