Parameter setting, Parameter setting -6 – SMC Networks SMC7908VoWBRA User Manual

Page 40

Text mode
Original mode

ONFIGURING

THE

OICE

ADSL R

OUTER

4-6

Parameter Setting

Select your Country and Internet Service Provider. This will automatically
configure the Barricade with the correct Protocol, Encapsulation and
VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed in this page, you
will need to manually enter settings. Go to “Parameter Setting - Country or
ISP Not Listed” on page 4-9 in the manual.

If your ISP uses Protocols PPPoA or PPPoE you will need to enter the
username, password and DNS Server address supplied by your ISP.

If your ISP uses Protocol RFC1483 Routed you will need to enter the IP
address, Subnet Mask, Default Gateway and DNS Server address supplied
by your ISP.

Note:

By default 192.168.2.1 is set for the DNS Server address, this
needs to be changed to reflect your ISP’s DNS Server address.

Click “NEXT” to continue.