beautypg.com

Connect the adsl line, Phone line configuration, 6 connect the adsl line – SMC Networks SMC7908VoWBRA User Manual

Page 22

background image

I

NSTALLATION

2-6

Connect the ADSL Line

Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to
the ADSL port on your Barricade. When inserting an ADSL RJ-11 plug,
be sure the tab on the plug clicks into position to ensure that it is properly
seated.

Phone Line Configuration

Installing a Full-Rate Connection
If you are using a full-rate (G.dmt) connection, your service provider will
attach the outside ADSL line to a data/voice splitter. In this case you can
connect your phones and computer directly to the splitter as shown below:

Figure 2-3. Installing with a Splitter

Plain Old
Telephone
System (POTS)

Filter

or

Ethernet

hub or switch

Voice

& Data

Voice

& Data

Data

Voice

ADSL Router

Residential
Connection
Point [Network
Interface
Device (NID)]

See also other documents in the category SMC Networks Hardware: