Working with the operating menu – Sennheiser EVOLUTIONWIRELESS SKP 100 User Manual
Page 13

12
Using the operating menu
Working with the operating menu
By way of example of the “
Sensitivity
” menu, this section describes how to
use the operating menu.
Changing from the current standard display to the operating
menu
Selecting a menu item
Changing and storing settings
Canceling an entry
To subsequently return to the last edited menu item:
Exiting a menu item
To directly return to the current standard display:
If the lock mode is activated, you have to deactivate it In order to
be able to work with the operating menu (see page 9).
̈
Press the
SET
button.
The current standard display is replaced by the main menu.
The last selected menu item is displayed.
̈
Press the
UP
button (
̆
)/
DOWN
button (
̄
) to change to the
“
Sensitivity
” menu item.
The current setting of the selected menu item is displayed:
̈
Press the
SET
button to call up the menu item.
̈
Press the
UP
button (
̆
)/
DOWN
button (
̄
) to adjust the
input sensitivity.
̈
Press the
SET
button to store the setting.
̈
Press the
ON
/
OFF
button to cancel the entry.
The current standard display appears on the display panel.
̈
Press the
SET
button repeatedly until the last edited menu
item appears.
̈
Change to the “
Exit
” menu item.
̈
Confirm your selection.
You return to the next higher menu level.
̈
Press the
ON
/
OFF
button.
SET
Menu
Sensitivity
–12 dB
Menu
–12 dB
S e n s i t i v i t y
– 12
dB
S e n s i t i v i t y
–36
dB
S e n s i t i v i t y
“Stored”
Call up
“Sensitivity”
Select the desired
setting
Store the setting
SET
SET
SET
SET
ON/OFF
SET
Menu
Exit
SET
ON/OFF
SKP100_529675_0409_Sp9.book Seite 12 Donnerstag, 9. April 2009 1:48 13