Sennheiser EVOLUTIONWIRELESS SKP 100 - Manual (Page 11)

10
Using the plug-on transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
Selecting a standard display
Audio signal is muted
Transmitter’s display panel: “ MUTE ”
ቨ
is displayed
Audio signal is activated (muting is canceled)
Transmitter’s display panel: “ MUTE ”
ቨ
is not displayed
RF signal is deactivated
Transmitter’s display panel: Transmission icon
ብ
is not
displayed, “ MUTE ”
ቨ
is displayed
RF signal is activated
Transmitter’s display panel: Transmission icon
ብ
is displayed,
“ MUTE ”
ቨ
is not displayed
You can also deactivate the RF signal on switch-on. For more infor-
mation, refer to the chapter “Switching the plug-on transmitter
on/off” on page 8.
Using the ON / OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the ON / OFF button
and proceed as described on page 8.
̈
Press the UP button (
̆
)/ DOWN button (
̄
) to select a
standard display:
Contents of the display Selectable standard display
“ Frequency/Name ”
“ Channel/Frequency ”
“ Name/Channel ”
MHz 533.875
ew100 G3
MUTE P
AF
ብ
ቨ
ew100 G3
MHz 533.875
MUTE P
AF
MHz 533.875
B.Ch: 20.12
MUTE P
AF
B.Ch: 20.12
MUTE P
AF
ew100 G3
SKP100_529675_0409_Sp9.book Seite 10 Donnerstag, 9. April 2009 1:48 13