Sony VRD-VC30 - Manual (Page 40)

40
5
Operate the camera or video device to start playback of video.
The following appears in the DVDirect’s display window.
Hint
The DVDirect detects and selects video input signals automatically when you play back
video from the connected video device. If the correct input source is not selected, press
M or m to select the correct input manually (page 14).
6
Press the (Record) button to start recording.
Recording of video from the camera or video device starts. During
recording, the progress appears in the display window.
Note
If you stop playback on the camera or video device during recording (or the video signal
is interrupted), the DVDirect pauses recording and the
(Record) button flashes
slowly. To resume recording, restart playback on the video device. If no video signal is
detected for 2 minutes, recording stops.
7
Press the (Stop) button to stop recording.
Wait a moment until the display window changes.
8
To record additional video, repeat steps 5 to 7.
REC quality
Remaining time
Recording time