Sharp PGD210U - Manual (Page 7)

E-6
Position of MOUSE/ADJUSTMENT switch
BLACK SCREEN (RED)
ON (RED)
ADJ.
MENU (RED)
ENTER (RED)
ADJ. ß/©, ƒ/∂ (NOT LIT)
—
Operating the Wireless Mouse Remote Control
The functions of your personal computer’s mouse have been built into the remote control enabling you to operate
your projector and personal computer with the remote control.
1. Slide the MAIN POWER switch on the rear of the projector on.
2. Press the POWER ON button on the front panel of the remote control to turn the projector power on.
3. When using the remote control as a wireless mouse, move the MOUSE/ADJUSTMENT switch to the MOUSE
position. When using the remote control to operate the projector, move the MOUSE/ADJUSTMENT switch to
the ADJ. position. To activate the remote control key back-light feature, press the LIGHT button on the remote
control. The colors of the buttons will change as shown in the table at the bottom of this page.
ON
MUTE
MN
B
BLACK
SCREEN
R-CLICK/ENTER
INPUT SELECT
DATA1
CHECK
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
DATA2
VIDEO1 VIDEO2
LASER/
MENU
VOL
OFF
R/C
OFF
ON
Wireless Mouse Remote Control
FRONT VIEW
ADJ. label MOUSE label
TRANSMIT indicator
MUTE button
BLACK SCREEN
button
RIGHT-CLICK/ENTER
button
INPUT SELECT
buttons
INPUT CHECK button
MOUSE/ADJUSTMENT
switch
LIGHT button
VOLUME UP-DOWN
buttons
LASER POINTER/MENU
button
MOUSE/ADJUSTMENT
(ß/ ©), (ƒ/∂) buttons
Note:
• When transporting
the remote control,
turn off the MAIN
POWER switch to
avoid draining the
batteries.
LEFT-CLICK button
Using the remote control in a dark
room
• Press the LIGHT button to turn on the back-
lights for the operation buttons for about 5 sec-
onds. The back-light colors are described in the
table to the right.
Note:
• If the MAIN POWER switch on the remote con-
trol is left on for more than 10 minutes without
operation, the power will automatically turn off.
To turn the power back on, press any button on
the remote control for at least one second.
SIDE VIEW
POWER ON/OFF
buttons
MOUSE
LASER POINTER (GREEN)
RIGHT-CLICK (GREEN)
MOUSE (NOT LIT)
ON (NOT LIT)
Button name
LASER POINTER/MENU
RIGHT-CLICK/ENTER
MOUSE/ADJUSTMENT
LEFT-CLICK
BLACK SCREEN
POWER ON/OFF
VOLUME UP-DOWN
MUTE
DATA 1
DATA 2
VIDEO 1
VIDEO 2
INPUT CHECK
When you change the setting of the MOUSE/ADJUSTMENT switch,
the functions of certain buttons on the remote control change. You
can tell which function the button currently possesses by the color
of its back-light display.
Remote control handling precautions
• The laser beam used in this product is harmless when
directed onto the skin, however please be careful not to
project the beam directly into the eyes. Do not stare into
the beam using an optical instrument.
• Do not expose the remote control to shocks, liquids or
high humidity.
The remote control may not operate normally if exposed
to direct sunlight or other intense light sources. Should
this happen, reposition the light source or the projector.
MAIN POWER switch
of remote control