Samsung LP10WSLSB/ZA - Manual (Page 40)

Appendix
40
Connect the external memory device (SD memory card or
1
USB memory device) to the PC (p. 14).
Copy the latest firmware you have downloaded to the
2
external memory device.
Copy the firmware to the root folder on the memory device. •
Disconnect the external memory device from the PC, and
3
then connect it to the frame.
From the Main menu screen, scroll to
4
Settings and touch
e .
Scroll to
5
Support and touch e.
Scroll to
6
Upgrade Software and touch e.
Select the external memory device and touch
7
e .
The firmware will be upgraded. •
When the upgrade is complete, the frame will restart
8
automatically.
Remove the external memory device. •
Back up your files (photos, videos, or music) •
before upgrading the firmware to prevent losing
them.
While the upgrading is in progress,
•
Do not disconnect the external device (SD memory -
card or USB memory device) from the frame.
Do not touch any buttons.
-
Do not insert any other memory cards. -
Do not turn the frame off . -
You can verify that the firmware is upgraded to the •
latest version by accessing Product Information
in Settings → Upgrade Software.
Upgrade Firmware
Download and install the latest firmware from the Samsung Electronics web page (http://www.samsung.com).
Upgrade Software
Getting upgrade files now.
Do not remove the storage device.
Upgrading…
Category
Photos
Clock
Alarm
General
Support
Option
Upgrade Software
Reset
Settings