Southbend SB1020 - Manual (Page 54)

-52-
For Machines Mfg. Since 8/09 Model SB1020 P A R T S
Machine Labels
401
402
403
404
405
406
407
408
409
410
411
412
413
414
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
REF PART # DESCRIPTION REF PART # DESCRIPTION
401 PSB1020401 MAIN CONTROL PANEL LABEL 408 PSB1020408 MACHINE NUMBER LABEL
402 PSBLABEL14HL CUTTING HAZARD LABEL 409 PSB1020409 BIOHAZARD WARNING LABEL
403 PSBLABEL02HL SHOCK WARNING LABEL 410 PSB1020410 DOWNFEED CONTROLS LABEL
404 PSB1020404 MACHINE ID LABEL 411 PSBPAINT01 SB GRAY TOUCH-UP PAINT
405 PSBLABEL15L ELECTRICITY LABEL 412 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
406 PSBLABEL04HL EYE INJURY HAZARD LABEL 413 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
407 PSBLABEL01HL READ MANUAL LABEL 414 SB1320 SOUTH BEND NAMEPLATE 125MM