Southbend SB1020 - Manual (Page 17)

For Machines Mfg. Since 8/09 Model SB1020
-15-
P R E P A R A T I O N
Bolting to Concrete Floors
Figure 8. Common types of fasteners for bolting
machinery to concrete floors.
Lag Screw
and Anchor
Anchor
Stud
Lag screws and anchors, or anchor studs
( below), are two popular methods for securing
machinery to a concrete floor. We suggest you
research the many options and methods for
securing your machine and choose the best one
for your specific application.
Figure 9. Typical machine mount.
Machine Mounts
Machine mounts are rubber pads mounted to
a threaded stud, which can be fastened to the
bottom of the machine.
Machine mounts offer certain advantages such
as ease of installation, vibration dampening, and
easy leveling. They also make it easier to relocate
the machine later on.
The disadvantage of machine mounts is that the
machine can shift or move over time. For this
reason, electrical codes may limit their use if
the machine is hardwired to the power source.
Also, mounts may reduce the total surface area
of machine-to-floor contact, depending on the
design of the machine.