SIIG 04-0418A - Manual (Page 16)

16
RAID Group: Selects a group ID from the available list.
Configuration:
Striped: for RAID 0; Mirrored: for RAID 1
Capacity: Select from a list of RAID group sizes.
Chunk Size: Select one value from the available list.
Rebuild Priority: Select from the available list. RAID 0
and virtual disk do not require this. 10 is the highest level
of rebuild priority which means that rebuild times will be
faster but will take more CPU resources to rebuild.
Devices: Select RAID member devices from the available
device segment list.
Rebuild Legacy RAID Group
This command displays a dialog box to let the user
choose a replacement segment to rebuild a non-fault
tolerant legacy RAID group.
Delete Legacy RAID Group
This command displays a dialog box to let the user
choose legacy RAID groups to delete. This item is
disabled if no legacy RAID group exists.
Convert Legacy RAID Group
This command displays a dialog box to let the user
choose legacy RAID groups to convert to new RAID
groups of the same RAID type. This item is disabled if no
legacy RAID group exists.
Create/Delete/Convert Legacy Spare
These commands display a dialog box to let the user
configure a legacy spare. These features are not used
with the eSATA II ExpressCard RAID.