Sanyo PLC - 12BL - Manual (Page 9)

9
PREPARATION
200"
154"
26.9' (8.2 m)
600"
462"
80.7' (24.6 m)
40"
77" 115"
154"
231"
308"
462"
600"
100"
150"
200"
300"
400"
POSITIONING THE PROJECTOR
ROOM LIGHT
● This projector is basically designed to project on a flat projection surface.
● This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).
● Refer to the figure below as an example when positioning the projector to the screen.
The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.
Minimum Zoom
Maximum Zoom
DISTANCE
Screen
Size
Max. Zoom
Min. Zoom
Distance
40"
4.9' (1.5 m)
100"
77"
13.1' (4.0 m)
150"
115"
20' (6.1 m)
300"
231"
40' (12.2 m)
400"
308"
53.8' (16.4 m)
THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG
THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE
HAZARD.
This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
● Do not cover the vents with papers or other materials.
● Keep the rear grill at least 3.3' (1m) away from any object.
● Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling air through the bottom vent.
VENTILATION
AIR INTAKE VENT
(BOTTOM SIDE)
EXHAUST VENT
(REAR SIDE)