SUPER MICRO Computer Super H8QM3-2 - Manual (Page 62)

4-16
H8QM3-2/H8QMi-2 User’s Manual
Event Log Confi guration
View Event Log
Highlight this item and press to view the contents of the event log.
Mark All Events as Read
Highlight this item and press to mark all events as read.
Clear Event Log
Select Yes and press to clear all event logs. The options are Yes and
No to verify.
PCI Express Confi guration
Active State Power Management
Used to Enable or Disable the PCI L0 and L1 link power states.
Remote Access Confi guration
Remote Access
Allows you to Enable or Disable remote access. If enabled, the settings below
will appear.
Serial Port Number
Selects the serial port to use for console redirection. Options are COM1 and
COM2.
Serial Port Mode
Selects the serial port settings to use. Options are (115200 8, n, 1), (57600 8,
n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1).
Flow Control
Selects the fl ow control to be used for console redirection. Options are None,
Hardware and Software.
Redirection After BIOS POST
Options are Disable (no redirection after BIOS POST), Boot Loader (redirection
during POST and during boot loader) and Always (redirection always active).
Note that some OS's may not work with this set to Always.