SUPER MICRO Computer Super H8QM3-2 - Manual (Page 57)

Chapter 4: BIOS
4-11
Serial Port2 Address
This option specifi es the base I/O port address and Interrupt Request address of
serial port 2. Select "Disabled" to prevent the serial port from accessing any system
resources. When this option is set to "Disabled", the serial port physically becomes
unavailable. Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port
address and IRQ 3 for the interrupt address. The options are Disabled, 2F8/IRQ3,
3E8/IRQ4 and 2E8/IRQ3.
Serial Port 2 Mode
Tells BIOS which mode to select for serial port 2. The options are Normal,
IrDA and ASKIR.
Hyper Transport Confi guration
CPU: CPU HT Link Speed
Link Speed
The HT Link will run at the chosen speed if it is less than or equal to the system
clock and if the motherboard is capable. Options are 200 MHz, 400 MHz, 600
MHz, 800 MHz, 1 GHz, 1.2 GHz, 1.4 GHz, 1.6 GHz, 1.8 GHz, 2.0 GHz, 2.2 GHz
and Auto.
CPU: CPU HT Link Width
Link Width
The HT Link will run at this chosen width. Options are Auto, 8 bit and 16 bit.