Smart Technologies LightRaise 40wi - Manual (Page 46)

Determining your interactive projector’s status
The projector’s status lights can help you determine its status. The table below describes the various
states of the projector.
N O T E
Interactive features also depend on the pen status.
Projector
Power light Projector
Service light
Projected
image Interactive
features Status and related
troubleshooting
Normal operating statuses
Solid green Off Correct Full control (if
the pen is
connected to
the projector
and a USB
cable connects
the projector
and your
computer) The system is operating
normally.
If image or sound issues
occur, see the remaining
sections of this chapter
for troubleshooting
information.
Flashing green Off None None The system is starting
up.
Solid amber Off None None The system is in
Standby mode.
Flashing
amber Off None None The system is entering
Standby mode.
Error statuses
Solid green Off Incorrect Full control (if
the pen is
connected to
the projector
and a USB
cable connects
the projector
and your
computer) The video input is not
from the computer
connected to the
projector. Select the
correct video input.
OR
There’s an issue with
the projected image.
See Resolving image
issues on page 45.
C H A P T E R 6
Troubleshooting your interactive projector
40