Samsung SADT-104WM User Manual

Page 7

6_SADT-104WM

0. Connect the cables of the Camera Adaptor with the outward cables, which then you

push in through the Cover Fixing Part to the Wall Mount Adaptor.
 Insert one piece of the two-strand cable into an empty area of the Wall Mount

Adaptor as in the figure below and push the other one into the Wall Mount Adaptor.

CAUTION

When you insert the cables into the Cover Fixing Part so that the insulation of the

cable junction is not peeled off or torn.

. As in the bottom-left figure, insert the rib of the cover into the Cover Fixing Part. Then,

push the Sanp-Fit of the cover into the Cover Fixing Part so that the cover is fastened

with the Wall Mount Adaptor.

WALL MOUNT ADAPTOR

< Insert one piece of the two-stranded cable >

< Insert the other piece of the two-stranded cable >

the place for joining a cover

WALL MOUNT ADAPTOR

the place for joining a cover

CAMERA ADAPTOR

COVER

RIB

SNAP-FIT

SADT-104WM_ENG.indd 6

2008-01-24 오전 10:24:08