SMC Networks SMC7904BRA - Manual (Page 32)

W
INDOWS
98/M
E
3-7
Obtain IP Settings from Your Barricade ADSL Router
Now that you have configured your computer to
connect to your Barricade ADSL Router, it needs to
obtain new network settings. By releasing old DHCP IP
settings and renewing them with settings from your
Barricade ADSL Router, you can also verify that you
have configured your computer correctly.
1. On the Windows desktop, click Start/Run...
2. Type “WINIPCFG” and click OK.
It may take a second or two for the
IP Configuration window to
appear.
3. In the IP Configuration window,
select your network card from the
drop down menu. Click Release
and then click Renew. Verify that
your IP address is now
192.168.2.xxx (2-254), your
Subnet Mask is 255.255.255.0 and
your Default Gateway is
192.168.2.1. These values confirm that your Barricade ADSL Router is
functioning. Click OK to close the IP Configuration window.