Sagem myX-1 - Manual (Page 55)

54
Security
Tick the box Pin num. control and validate by
pressing OK.
Changing the PIN2 number (*)
You have a second PIN number. The procedure for
modifying the PIN2 number is identical to that for the
PIN number.
Changing the phone code
The Phone code menu enables you to activate the
phone code so that it is requested and checked each
time the phone is switched on, in the case of a
different SIM card being used.
If the incorrect code is entered, the time interval
between each attempt increases, making use
impossible.
To change the phone code, you must first check that
it is active (Control phone code menu).
To activate:
To the question: Phone code?, enter 0000 and
validate (press the righthand key
).
Tick the Phone control box and validate by
pressing OK.
To deactivate:
To the question: Phone code?, enter your code
(possibly changed) and validate (press the righthand
key
).
Do not tick the Phone control box and validate by
pressing OK: it will reset the code to 0000.
The phone code is a secret code,
intended to protect the phone in the
event of theft. It is linked automatically
to the SIM card present on activation.
MYX-1_EN-09security.pmd 23/09/2003, 16:30 54