Sagem myX-1 - Manual (Page 46)

45
Ringing tones
Setting the vibrator (depending on
model)
Using the scrolling keys, select one of the following
options: inactive vibrate, only vibrate, vibrate and ring,
vibrate then ring.
Validate by pressing the righthand key .
Selecting silent mode (depending on
model)
If you want the ringing tone of your phone to be
replaced by the vibrator and the beeps to be
suppressed (except for the alarm tone), tick the box
and validate by pressing OK.
You can also activate/deactivate the silent mode by
holding down the
∗ ∗ ∗ ∗ ∗ key.
This mode is indicated by the symbol on the screen.
Setting the beeps
Different controls are available:
Setting the keypad tones
Select the tone required using the scrolling arrows and
validate (press the righthand key
).
Setting the network tone
If you want your phone to give a warning beep when it
locates a network on which it can communicate:
Tick the box and validate by pressing OK.
Wherever you require your calls to arrive
discreetly, you can use the vibrator or
select the silent mode.
Silent mode is automatically deactivated
when the hands free car kit is connected
as well as when the phone is switched
on/off.
You can select the tones produced by
your keypad: Beep, DTMF (musical
keys) or non active tones (in this last
case, when you press your keyboard, it
does not make a noise).
MYX-1_EN-07ringtones.pmd 23/09/2003, 16:30 45