Sagem myX-1 - Manual (Page 42)

41
Calls
Placing calls on hold
(Service depending on the operator)
During a call, you can put the current call on hold by
pressing OK.
During a call, when pressing the central key, the
lefthand key changes function and enables you to
access different options for the call.
Multi-conferencing (*)
(Service depending on the operator and depending on
model)
A multi-conference is limited to 6 participants: 5 in a
multi-conference and one additional call
During a call, when pressing the central key, the
lefthand key changes function and gives access to
different possibilities of actions with this call.
Standard commands
Sequences of standard keys also permit access to
services such as call notification, call holding, multi-
conferencing, and open up additional possibilities:
0 Reject a call holding or waiting (or multi-conference
calls).
1 End the current call holding or waiting (or the multi-
conference calls if there are any) and accept the call
(or multi-conference calls).
1 X End the current call order number X.
Multi-conferencing enables you to talk to
several callers (depending on the
network capacity and on the model).
Warning
In this case, pressing ends all calls.
MYX-1_EN-06Calls.pmd 23/09/2003, 16:30 41