Sony SDP-E300 - Manual (Page 2)

9 GB
Processor Operations
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To listen to Press
Records PHONO*
Radio programmes TUNER*
Compact discs (CD) CD*
Audio tapes (Tape deck B) TAPE*
VHS Video tapes VIDEO 1
(Remote control mode VTR 3)
Laserdiscs VIDEO 2
TV programmes TV
Other components LINE**
* The input selector switches to LINE IN. If you
connect a Sony amplifier (that can be controlled by
infrared wireless remote) to the LINE IN jacks of
the processor, the amplifier’s input selector
automatically switches to the selected component.
** If you connected an additional audio component to
the LINE jacks as shown on page 6.
If you want to change the factory setting of a
button, see page 10.
If the component does not turn on
Press the power switch on the component.
2
Start playing.
Refer to “Remote Button Descriptions” on page 18
for details.
To turn off the components
Press SYSTEM OFF.
If you use a Sony TV
When you press TV to watch a TV programme, the TV
turns on and switches to the TV input. The TV also
turns on when you press VIDEO 1 or VIDEO 2 and
switches to the appropriate video input.
If the TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
Operating one component while using
another (Background Operation)
You can temporality operate other components while
listening to or watching a programme.
1
Hold down BACKGROUND.
2
Press both the corresponding numeric button of
the component you’re going to use (see the table
below) and one of the following buttons at the
same time; VISUAL POWER, TV/VIDEO, CH
PRESET +/–, ANT TV/VTR, D.SKIP,
( , 9 , p ,
0 / ) , = / + , P , r .
Example: To start recording on the VCR while
watching TV.
While holding down BACKGROUND,
press 9 (or 8) and press
r at the same
time.
The numeric buttons are assigned to select the
functions as follows:
* Sony VCRs are operated with a VTR 1, 2 or 3 setting.
These correspond to Beta, 8mm and VHS respectively.
Numeric buttons
BACKGROUND
Numeric button
1
2
3
4
5
6
7
8
9
0
Operates
CD player
DAT deck
MD deck
Tape deck A
Tape deck B
LD player
VCR (remote control mode VTR 1*)
VCR (remote control mode VTR 2*)
VCR (remote control mode VTR 3*)
TV
(continued)