Siemens SL42 - Manual (Page 77)

19.3.02 SL42-SL45-ger.fm U35 /SL45i- English, A31008-H4860-A1-3-7619
75 Fax/data mode using a PC
With the phone connected to a PC
(see p. 76), you can transmit and
receive faxes and data. Appropriate
software for data communication/
fax communication must be
available on your PC.
Fax and data services must be
enabled on your phone. Different
networks support different types of
fax/data reception; contact your
Service Provider for details.
Fax/data
Your Service Provider must give you
a phone number for telephoning and
a fax/data number.
Sending
Start your PC communication
program and enter the destination
phone number in the program.
Receiving
The call is signalled by a special
ringer and its type (fax or data) is
displayed.
Now start the communication
program on your PC to receive the
fax.
Incoming Data
Answer Reject
K
Speech/fax
Send
(Menu) ! Setup !
Fax/data mod. !
Send Sp/Fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up
the following soft key is available for
two seconds:
Sp/Fax Switch to Send Sp/Fax
mode.
Fax Switch to fax mode; you
may now send a fax.
Receive
( Only if a special fax number is not
available).
Start the communication program
on your PC and switch on the
function on the phone
during the call
(the PC accepts the connection).
Menu ! Settings !
Fax/data mod. !
Receiv.Sp/Fax
End transmission
End transmission in the PC software
and/or press
S
.