Sanus Systems JFBD1 - Manual (Page 3)

NoTe
Do not fully tighten the ¼-20 x 0.5″ Screws (E) until assembly is complete.
Attach the Bottom Backboard (B) and Backboard Joining Plates (C) to your JFV65 and the Mounting Rails with eight
¼-20 x 0.5″ Screws (e) and eight ¼″ Lock Washers (F). See Figure 3.
Figure 3
Screw (e)
Lock
washer (F)
Bottom
Backboard (B)
Backboard Joining
Plate (C)
Screw (e)
Lock
washer (F)