Sony SA-KL50W - Manual (Page 2)

2 GB
NOTICE FOR THE
CUSTOMERS IN THE UNITED
KINGDOM
A moulded plug complying with BS
1363 is fitted to this equipment for your
safety and convenience.
Should the fuse in the plug supplied
need to be replaced a 5 AMP fuse
approved by ASTA or BSI to BS 1362,
(i.e. marked with 2 or @ mark) must be
used.
If the plug supplied with this equipment
has a detachable fuse cover, be sure to
attach the fuse cover after you change
the fuse. Never use the plug without the
fuse cover. If you should lose the fuse
cover, please contact your nearest Sony
service station.
IMPORTANT
If the plug supplied is not suitable for
the socket outlets in your home, it
should be cut off and an appropriate
plug fitted in accordance with the
following instructions.
The wires in this mains lead are
coloured in accordance with the
following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the
mains lead of this apparatus may
not correspond with the coloured
markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue
must be connected to the terminal
which is marked with the letter N or
coloured black. The wire which is
coloured brown must be connected
to the terminal which is marked
with the letter L or coloured red. Do
not connect either wire to the earth
terminal in the plug which is
marked by the letter E or by the
safety earth symbol Y or coloured
green or green-and-yellow.
WARNING
To prevent shock hazard, do no insert
the plug cut off from the mains lead into
a socket outlet. This plug cannot be used
and should be destroyed.
WARNING
To prevent fire or shock
hazard, do not expose the unit
to rain or moisture.