Control unit – Stanton S-700 User Manual
Page 5
PLAY
PAUSE
F
FO
OR
R W
W A
A R
R D
D
N
N O
OR
R M
M A
A L
L
R
R E
E W
W IIN
N D
D
REVERSE
REVERSE
BRAKE
BRAKE
MOTOR OFF
MOTOR OFF
PLAY
PAUSE
F
FO
OR
R W
W A
A R
R D
D
N
N O
OR
R M
M A
A L
L
R
R E
E W
W IIN
N D
D
REVERSE
REVERSE
BRAKE
BRAKE
MOTOR OFF
MOTOR OFF
7
1 2
3
9
4
5
13
12
14
22
15 16
17 18
24
19
20
10
11
8
6
25
CONNECT
TO
MAIN UNIT
2
CONNECT
TO
MAIN UNIT
1
CONTROL
CONTROL
2
1
21
23
CONTROL UNIT
1. PROGRAM - Depress this button to stop the CD and
enter the program mode. Note the word “PROGRAM”
is indicated on the display. Select each track to be
programmed and press the PROGRAM button
between selections. You can program up to 30 tracks.
Press PLAY to start the program. To exit and erase
program hold the PROGRAM button down for more
than 2 seconds while the unit is stopped.
2. TIME (Time Button) - The TIME button switches
among Elapsed playing time, Remaining time in a
selection, Total remaining time of the disc.
3. MEMORY BUTTON (Memory Cue Button) - This
button is used to save the current position of the CD
to the cue memory. You can memorize up to 10 cue
points. To erase the entire cue memory hold the
MEMORY button down for more than 2 seconds until
the cue memory indicators on the LCD display are off.
4. DIRECT ACCESS KEYS - These buttons have 3
diffirent functions depending on the MEMORY and
RECALL LEDs you are working in.
a The direct access keys are used to quickly go to the
track on a CD while both MEMORY and RECALL
LEDs are off.
b Press the direct access keys when the MEMORY
LED lit. The current CD position will be saved to the
cue memory then the cue memory indicator on LCD
display lit.
c Press the direct access keys when the RECALL
LED lit. The cue memory indicator on the LCD
display will flash to show which cue memory point is
recalled.
5. PITCH BEND +/-16% (Pitch Bend Button) - The
pitch will automatically rise while the + button is
pressed and return to the original pitch when the
button is released. The pitch will automatically drop
when the – button is pressed and return to the
original pitch when the button is released.
6. COUNTER
BUTTON - Tap this button with the beat
of the music to determine the current Beats Per
Minute (BPM).
7. SGN/CTN
– Choose between single or continuous
play by pressing once or twice.
8. OPEN/CLOSE (Disc Tray Open/Close) - Press to
load or eject the disc. Each press will open or close
the disc tray on the transport. NOTE: Tray will not
open when the disc is playing.
9. RECALL BUTTON (Recall Cue Button) - This
button allows you to cue up any of the 10 memory
CUE points that have been memorized. The player
will cue up the selected point when RECALL button is
pressed.
10. LCD DISPLAY - Indicates all the functions, as they
are occurring with the CD.
11. PITCH (Pitch Button) - This button activates the
Pitch Slider (18).
12. JOG WHEEL (OUTER RING) –This JOG wheel has
2 functions depending on the mode you are working
in.
a.Pause (Search control) - This wheel has 4 forward
and 4 backward speed positions for searching
through songs. The more you turn the wheel in either
4