Stanton S-700 - Manual (Page 10)

a. Press PLAY/PAUSE BUTTON (22) so that
music is playing. PLAY/PAUSE LED will light
(figure 11).
b. Press MEMORY BUTTON (3) to set a CUE
POINT in memory. MEMORY LED will light
(figure 12).
c. Press desired DIRECT TRACK ACCESS
BUTTON (4) (figure 13).
d. Press RECALL BUTTON (9) (figure 14).
e. Once RECALL LED lights, rapidly press the
DIRECT TRACK ACCESS BUTTON (4)
previously selected. (figure 15)
(3) By rapidly tapping on the SQ Button.
a. Be sure you are in playback mode.
b. Pressing the IN/R.CUE Button this will set a
new cue point.
c. To access this SQ rapidly tap on the SQ Button.
PLAY
PAUSE
PLAY
PAUSE
PLAY
PAUSE
Fig.9 Fig.10 Fig.11
Fig.13
Fig.15 Fig.14
Fig.12
21.SEAMLESS CUE
Onec a ceu point has been selected (section 7), it is
possible to go back to it seamlessly by tapping the SQ
(25) button. A stuttering effect can also be created
using the cue point by rapidly tpping the SQ button
several times. Seamless cue only works on the
selected cue point.
22. BRAKE EFFECT
To rotate Shuttle wheel clockwise to end to enable
Brake effect. Release the Shuttle to return to normal
play mode. This effect simulates the sudden platter
stop of a turntable.
23. MOTOR OFF EFFECT
To rotate shuttle wheel counterclockwise to end to
enable Motor off effect, release the Shuttle to return
to normal play mode. This effect simulates turning the
power off on a turntable.
24. REVERSE PLAY
To rotate shuttle wheel counterclockwise around 1/3
section to reverse the playback. When this effect is
selected the disc will begin to play in reverse mode
and continue to play in reverse until reverse play is
turned off (To rotate Shuttle wheel clockwise around
1/3 section to turn off reverse playback).
PREPARATIONS
Checking the Contents
Check that the carton contains the following items:
1. Main unit
2. Control unit
3. Operating instructions
4. Pair of RCA pin cord.
SPECIFICATIONS
Power Supply:
AC 115 / 230V, 50/60Hz
Power Consumption: 25W
Dimensions:
Main unit 482(W) x 88.8(D) x 262(H)mm
Control unit 482(W) x 132(D) x 74(H)mm
Weight:
Main unit 5Kgs
Control unit 2Kgs
502-NCDS700-1021B
9