Sanyo VMC-L1017 - Manual (Page 9)

– 8 –
Troubleshooting
Before requesting service or repair, perform a check as described in the following section. If this does not work, return the unit to
the place of purchase or authorized repair agent to undergo adjustment.
Problem Points to check
No image is displayed.
• Is the connected device outputting a video signal?
• Is the connection correct? (Page 4)
• Using the input mode control (MODE), is the correct input signal selected? (Page 5)
No sound is heard.
• Is the connected device outputting an audio signal?
• Is the connection correct? (Page 4)
• Check the volume level is not set to 0. (Page 5 – 7)
The display is dark. • Are the brightness and contrast set to the correct level? (Page 5 – 7)
The display is flickering. • Is there a device nearby which is emitting a strong magnetic field? If so, remove it.
Colors displayed in different parts of
the display are strange.
• Is there a speaker or magnet nearby?
After removing the object, turn the unit off for at least 30 minutes and switch it on
again.
There is a hissing noise.
• Effects of this type may be caused by temperature changes in the room but do not
indicate a fault.
When 2 or more monitors are next
to each other, the display shakes or
there is some distortion.
• The monitors are interfering with each other. Increase the distance between them.
./*#A75 8/% .AA DQQM TVR ''''և'''' ߆ ''ވ''