Sanyo VMC-L1017 - Manual (Page 7)

– 6 –
Monitoring display adjustment
Adjustment method for : Composite/ : S-Video signal selection
■ ■ ■ ■ Operation
■ ■ ■ ■ Adjustment item
* May differ depending on location of purchase.
Item Description Parameters Default setting
Color Adjust the color. 0 – 51 30
Tint Adjust the tint (only available for NTSC signal). 0 – 51 25
Brightness Adjust the brightness. 0 – 51 25
Contrast Adjust the contrast. 0 – 51 25
Sharpness Adjust the sharpness. 0 – 51 27
Volume Adjust the volume. 0 – 51 30
H-Position Adjust the horizontal position of the display. 0 – 51 25
Language Select the language of the display.
English, Chinese,
French, German,
Spanish, Italian,
Japanese
English
Color Temp. Select the color temperature.
9300 ° K, 6500 ° K,
Standard
9300 ° K*
Scan Select the image scan type. Over, Under, Full, 1:1 Full
PIP
Select to use Picture in Picture, showing an additional smaller
display in the upper left corner.
VGA, Off Off
Recall
Pressing the +, – buttons together will return the settings to the
default setting.
– –
1 Press the adjustment control (MENU).
2 Choose the adjustment item.
3 Change the setting value.
4 If necessary, repeat
steps
2 and 3 .
POWER MODE AUTO MENU
MENU
1 2 3
Composite In NTSC
30
25
25
25
27
30
25
English
9300K
Full
Off
Setting value Adjustment item
Color
Tint
Brightness
Contrast
Sharpness
Volume
H-Position
Language
Color Temp.
Scan
PIP
Recall
R At the top of the screen, an adjustment panel as shown in the diagram
to the right will be displayed.
Down Up
• Pressing the adjustment control (MENU) again, or waiting for a number of
seconds will cause the adjustment panel to disappear.
• The settings will be retained even if the unit is switched off, but if the power supply is disconnected, settings will return to default.
• The default language display is English. If the language setting is changed, the menu display will be in the language chosen.
./*#A75 8/% .AA DQQM TVR ''''և'''' ߆ ''ވ''