Wireless – SMC Networks Barricade SMC7004VWBR V.2 User Manual

Page 51

Text mode
Original mode

Advanced Setup

Wireless

To configure the Wireless Barricade as a wireless access point
for wireless clients (either stationary or roaming), all you need to
do is define the radio channel, the Service Set identifier (SSID),
and encryption options.

Channel and SSID

You must specify a common radio channel and SSID (Service
Set ID) to be used by the Wireless Barricade and all of your
wireless clients. Be sure you configure all of your clients to the
same values.

ESSID: The Service Set ID. This should be set to the same value
as other wireless devices in your network. (Default: SMC.)

Note:

The SSID is case sensitive and can consist of up to 32
alphanumeric characters.