Sharp MD-MT16H User Manual
Page 8
7
■
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of disuse, be sure to
charge it fully.
1
Open the battery cover.
●
Slide the battery cover as far as it will
go to the outside and then lift to open it.
If the battery cover is lifted without be-
ing slid all the way out, it may break.
2
Insert the rechargeable battery according to
the polarity marked on the bottom of the unit.
3
Close the battery cover.
4
Plug the AC adaptor into the AC socket,
and then insert the plug on the AC
adaptor lead into the DC IN 5V socket.
5
Press the CHARGE button to begin
charging.
●
“
” will appear, and the battery
will begin charging.
●
After about 4 hours have passed,
“
” will go out.
This indicates that the battery
charging is about 90% complete.
●
To charge the battery fully, continue
charging for about 2 more hours.
(In this case, you do not need to press
the CHARGE button. Even if the
CHARGE button is pressed, “
”
will not appear.)
Notes:
●
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
●
The battery will not be charged when the
power to the main unit is turned on.
●
Do not force open the battery cover too wide.
●
Do not use a rechargeable battery or an
AC adaptor other than those specified
on page 3 (OPTIONAL ACCESSORIES).
●
The charging time will vary, depending
on the condition of the battery.
●
When the battery is charged for the first
time or is charged after not being used
for a long period, the operating time may
be shorter than normal. The battery life
will recover with normal use i.e. charg-
ing and discharging.
●
To avoid shortening the service life of the
battery only recharge the battery after
in has been completely discharged.
1
2
4
3
5
AC 230-240V,
50/60 Hz
Insert securely,
all the way in.
To the DC IN 5V socket
* MD-MT16H FOR UK(01-21)
99.4.2, 0:56 PM
8