Sharp MD-MT16H - Manual (Page 37)

36
■ To cancel the auto power
save function
Power consumption can be reduced by
controlling the memory storage time. You
can cancel the auto power save function.
1
Whilst in the stop mode ...
Hold down the MODE button until “SET
UP” appears.
● When you release the button, “BEEP
ON” or “BEEP OFF” will appear.
2
Press the
5
or
4
button until “AUTO
Psave” appears.
3
Press the MODE button.
● “Psave OFF” will appear, and the auto
power save function will be cancelled.
● To restore the auto power save func-
tion, select “AUTO Psave”.
4
Press the ■ /:OFF button.
● The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 10 seconds
of information is stored in the semiconduc-
tor memory. Therefore, even when the
pickup cannot read information for a second
or two due to an external shock, the sound
will continue without interruption because the
information stored in memory is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable bat-
tery or the alkaline batteries. Whilst in the
auto power save mode, 5 - 10 seconds of
sound information is stored in memory.
When the auto power save function is dis-
abled, 10 seconds of sound information is
always stored in memory. (When the AC
adaptor or a car adaptor is used, the infor-
mation storage time is always 10 seconds,
regardless of the auto power save mode.)
When the unit is used in places exposed to
excessive vibration, cancel the auto power
save function.
* MD-MT16H FOR UK(22-42) 99.4.2, 0:55 PM 37