Samsung SHR-3010 - Manual (Page 19)

3-10
GB
3-9
DIGITAL VIDEO RECORDER
GB
Change of Settings
① Move to desired menu item by using an UP( ) or a DOWN( ) button.
➁ You can change settings by pressing the SET/STILL( ) button.
➂ Press the UP( ) or DOWN( ) button in order to change settings.
➃ Settings will be changed if pressing the SET/STILL( ) button after selecting
desired
settings.
Move to Parent Menu or Menu End
Press the MENU button to move to the parent menu from the lower mode or end the menu.
Note Note
In general, you can use the UP ( ) or DOWN( ) button to change the setting, but
you can also use the JOG( ).
Menu Enter
Press a MENU button. Then, following screen appears.
Menu Move
Move to desired menu item by using an UP( ) or a DOWN( ) button. In this case, a
highlighted cursor is displayed in the selected item. The sub menu item is displayed if
pressing a SET/STILL( ) button. Selections appear in the left side and settings for
selected matters appear in the right side.
3
Menu View
Note Note
You can go into the menu only when the system is in the Live screen mode. If the
system is in the recording mode or playback mode, you cannot go into the menu.
To go into the menu, first stop the recording or playback.
Note Note
In general, you can use the UP( ) or DOWN( ) button to move to the desired
menu item, but you can also use the JOG( ). Turn the JOG( ) counterclockwise
to move the cursor downward, turn it clockwise to move the cursor upward.
MAIN MENU
CLOCK/DISPLAY MODE SETUP
RECORD MODE SETUP
ALARM RECORD SETUP
TIMER RECORD SETUP
SYSTEM SETUP
COMMUNICATION SETUP
SYSTEM INFORMATION
BACKUP SETUP