SMC Networks SMCWBR 14-GM User Manual

Page 68

Then, if the wireless client wants to associate, it has to request to authenticate.

Appendix D FAQ and Troubleshooting

Reset to factory Default

There are 2 methods to reset to default.

Restore with RESET button

First, turn off the router and press the RESET button in. And then, power on the router and push

the RESET button down until the Status LED start flashing, then remove the finger. If LED flashes

about 8 times, the RESTORE process is completed. However, if LED flashes 2 times, repeat.

2. Restore directly when the router power on

First, push the RESET button about 5 seconds (M1 will start flashing about 5 times), remove the

finger

. The RESTORE process is completed.