SMC Networks SMCWBR 14-GM User Manual

Page 20

the password, keep it empty. Connection ID: optional. Input the connection ID if your ISP

requires it. Maximum Idle Time: the time of no activity to disconnect your PPTP session.

Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled,

this product will connect to ISP automatically, after system is restarted or connection is

dropped.

Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto-Reconnect (Always-on): The device will link up with ISP until the

connection is established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

L2TP: Some ISPs require the use of L2TP to connect to their services

First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.

For example: Use Static: My IP Address and My Subnet Mask: the private IP address and

subnet mask your ISP assigned to you. Server IP Address: the IP address of the PPTP

server. PPTP Account and Password: the account and password your ISP assigned to you.

If you don't want to change the password, keep it empty. Connection ID: optional. Input

the connection ID if your ISP requires it. Maximum Idle Time: the time of no activity to

disconnect your PPTP session. Set it to zero or enable Auto-reconnect to disable this

feature. If Auto-reconnect is enabled, this product will connect to ISP automatically, after